Double-deep racking
Pallet racking two pallets deep on each side of the aisle, so fewer aisles are needed for the same run of racking.
Double-deep racking, explained
Standard pallet racking set two pallets deep on each side of the aisle. The front pallet is reached directly, and the rear pallet once the front one has been moved, using a double-deep reach truck.
- Runs two pallets deep on each side of the aisle
- Fewer aisles than single-deep racking
- Front pallets reached directly; rear pallets once the front one has moved
- Usually worked by a double-deep reach truck
- Built from the same frames and beams as selective racking
Semi-selective

Layout & Drawings in Bayplot, where we lay out the double-deep racking for your building. Shown with the planner’s built-in example data.
How it’s laid out
A simplified diagram of the main parts and how loads and people move. Your layout is drawn to your building in Bayplot.
Where it works well
- Products that regularly hold at least two pallets each
- Sites that need more pallets than selective racking gives, without full lane storage
- Reserve and buffer stock
Things to consider
- The rear pallet isn’t immediately accessible
- Often last in, first out within each pair
- Needs a double-deep reach truck rather than a standard one
General guidance only. The right choice depends on your products, throughput, building and trucks. We check it on site before the design is finalised.
Labelling & signage for double-deep racking
The labels and signs that usually go with it, supplied and fitted by us as part of the job.
Labelling & signage →- Rack load noticesSafe working load notices for each run, with the values taken from the racking design.
- Beam & location labelsLocation labels that tell front and rear pallet positions apart.
- Aisle & bay signsHanging, end-of-aisle and floor-mounted signs so every aisle and bay is easy to find.
- Floor marking & lane linesAisle edges, walkways, drop zones and lane lines marked on the floor.
- Racking inspection tagsGreen, amber and red tags to mark damage found at inspection.
You might also consider
Bayplot 3D viewAdjustable pallet racking
Selective racking where every pallet faces an aisle. The everyday choice for mixed stock.
See adjustable pallet racking →
Bayplot 3D viewPush-back racking
Lanes a few pallets deep on carts or rollers, loaded and picked from the same aisle.
See push-back racking →
Bayplot 3D viewDrive-in & drive-through racking
Dense lane storage with no aisles between the bays. Trucks drive into the lanes.
See drive-in & drive-through racking →Planning double-deep racking?
Request a quote with a drawing, photos or a Bayplot export, or plan it yourself in Bayplot first.